CDP-100 - Compact Disc Player
Information
The CDP-100 is a single-disc CD player that features both balanced and single-ended analog outputs, HDCD decoding and 24-bit/352.8kHz digital to analog conversion.
Specifications
| model | CDP-100 |
| frequency response distortion (THD + noise) |
20Hz - 20kHz ±0.1dB 0.001% |
| analog section | |
| single-ended output balanced output S/N ratio channel separation |
2V 4V >110dB typical >110dB |
| digital section | |
| D/A converter sample rate clock jitter |
2 x Burr-Brown1738 (two DACs in mono mode for l & r channel) 352.8kHz <2ps typical |
| outputs | |
| single-ended balanced coaxial (S/PDIF) |
1pr RCA 1pr XLR 1 RCA |
| formats supported | |
| CD CD-R CD-RW HDCD |
yes yes yes yes |
| weights & measurements | |
| width depth height gross weight net weight |
17.5” (445 mm) 16.5” (419 mm) (excluding connectors) 4.75” (121 mm) 33 lbs (15 kg) 26 lbs (12 kg) |
Firmware
CDP-100 – Firmware
Current Version: V1.28
Last Updated: 20 June 2007
How to check the currently installed Firmware
On the front panel or the remote control: press MENU, then from the setup menu select STATUS, then VERSION INFO.
Installation Program
This Firmware update must be transferred from a local Windows PC to the unit using the Classé Downloader 1.2 utility. The Classé Downloader utility is a small standalone application that can run directly from your computer’s Desktop or Program Files folder without further software installation. It is included in the ZIP download archive.
Firmware History
- Version 1.2.8 - February 2007 - download
- Version 1.2.6 - May 2005 - download
- Version 1.2.5 - March 2005 - download
Owner's Manual
- Owner's Manual - English
Voltage
The archictecture of a CDP-100 is similar to the architecture of a CDP-10. Please refer to the Service Manual of the CDP-10 for further information.
Image Gallery
Drawings 2D/3D
- CDP-100 - 2D Drawing.pdf
- CDP-100 - Back Panel Drawing.pdf
Warranty
Delta I as well as all Legacy units are now out of Warranty. In the unfortunate event that your unit develops a problem we advise you to follow the procedure below:
- Make sure the unit has the latest Firmware (if it requires firmware). Does it solve the issue?
- Try and find your answer on this website;
- You can submit a question on-line, call your local Classé Dealer or contact a Classé Service Center directly;
- Try and find information on any of the on-line Forums.
Repair
- Should your unit require repair, then you have 2 options (since the unit is Out of Warranty)
- You can try and find a skilled local repair technician to help you repair the defect. Best is to work with someone who has repaired Classé equipment before (we do not keep a list, you will have to ask around).
- Contact a Classé Service Center to see if they can help you.
- Where possible, Classé technicians at one of the 3 global Service Centers will help and accommodate any in-depth technical question a local repair technician may have.
Upgrade Kits
There are no Upgrade Kits for this product.
Replacement Mechanism
Unfortunately, there is no replacement mechanism available for the CDP-100. The replacement mechanism Classé offers for the other CDT/CDP Models is incompatible with the CDP-100.
Replacement Shipping Box
A replacement Shipping Box can be ordered with Classé. The box is made out of Coroplast®, which is a strong and waterproof material. Semi-rigid foam inserts ensure the best possible protection during storage and transport. Please inquire with your local Classé Dealer or contact Classé directly.
*) For shipping Legacy units (made before Delta I series) we recommend using the original box if still intact, and to put this box with at least 2 inches of semi-rigid foam into a new corrugated box.
Parts Availability
- Classé still has an inventory of parts for Delta I and Legacy Models.
- A local Dealer or national Distributor can inquire on your behalf if certain parts are available.
Parts Order
Parts List to follow.