CA-5300 Five-Channel Amplifier

Firmware

• Current Version: V2.02 (Front Panel) – P4 (Heatsink)
  
  Last Updated:
    • 27 February 2015 (Front Panel Software)
    • 14 September 2011 (Heatsink Software)

Owner's Manual

• Owner's Manual
  English | Français | Deutsch | Español | Italiano | Русский

Your Owner's Manual has a detailed section on Installation and Set-up.  In addition to this information we would like to point out the following topics that have come up over the years

Home Automation

All Delta II amplifiers can be controlled via CAN-Bus, DC Trigger (in-out), IR in-out and via RS232.  The latter is available via a DB-9 connector on the rear panel.

IR Remote Control Codes

• CA / CT Amplifiers - IR Codes.pdf | HEX Codes.pdf

All Delta II Amplifiers can be controlled using RS232, a protocol used by Home Automation Systems like Crestron, Control 4, etc. Delta II Amplifiers are equipped with a DB-9 connector.

• All Delta II Amplifiers RS232 Protocol.pdf

Protection Modes - Front LED Status

Text to follow

Amplifier Event Log File

All Delta I and Delta II Amplifiers store important information about their status and operation in a so-called Event Log File.  This Event Log File can be extracted form the amplifier using a PC computer  (laptop or desktop) equipped with a USB-connection (for Delta II amplifiers) or a DB9/RS232 connection (for Delta I amplifiers).

etc etc

Voltage

• Delta II Amplifiers are set for a specific voltage, corresponding to your region. You will find the Operating Voltage indicated on the rear panel;
• Change of Operating Voltage can only be done through the Classé Service Centers, it involves changes in both hardware and software as well as a recalibration of the AC Sensing Circuit.

Fuse

• The CA-5300 and the CT-5300 has one AC fuse accessible via the rear panel;
• The Fuse Value is different for different Operating Voltages;
• Make sure that the AC Fuse corresponds to the AC Voltage offered;
• Delta II amplifiers only have an external Fuse, there are no internal fuses.

Fuse Specifications

• For 100-120 Volts

Fuse Value: T6.3AH 250V 
Description: IEC time lag, high breaking capacity, 6.3A 250V

Classé Part No. 51764877-00 0
Schurter Part No. 0001.2512
Littlefuse Part No. 21506.3

• For 220-230-240 Volts

Fuse Value: T3.15AH 250V
Description: IEC time lag, high breaking capacity, 3.15A 250V)

Classé Part No. 51764794-00
Schurter Part No. 0001.2509
Littlefuse Part No. 2153.15

Drawings 2D/3D

• CA-5300 - 2D Drawing.pdf
• CA-5300 - Back Panel Drawing.pdf

Brochure

• Classé Product Brochure - English | 中國
  

Info Sheet

• CA-5300 Info Sheet- English | Français

Warranty Delta II Series

Your Classé Delta II unit has a 5-year Limited Product Warranty on Manufacturing Defects that covers both Material and Labor.

• Please note that the Classé Limited Warranty is only valid in the Country of Purchase.
• Please make sure to keep your original Purchase Receipt.
• The 5-year Limited Warranty is transferable to a next owner. When selling your unit, please hand the original purchase receipt to the next owner.

In case you reside in a Country that does not have a national Classé or Bowers and Wilkins Distributor, please contact one of our three global Service Centers (Hong Kong, United Kingdom or USA) to discuss Warranty Service.

Warranty Date Dispute 

If you do not have your original purchase receipt anymore, Classé will use the Factory Shipping Date as the  Purchase Date to determine Warranty Status.

Repair 

In the unfortunate event that the unit develops a problem we advise you to follow the procedure below

• Make sure the unit has the latest Firmware.  Does it solve the issue?
• Try and find your answer on this website
• You can submit a question on-line, call your local Classé Dealer or contact a Classé Service Center directly
• Should the defect require repair, a Classé Service Center will send you a Return Authorization which you can use to ship your unit
• Please do not ship a unit to a Classé Service Center WITHOUT Return Authorization 

Upgrade Kits

There are no Upgrade Kits available for this Model.

Replacement Parts

The following Replacement Parts can be installed by a customer or dealer.

• Front Panel Filter Cap, black
• Top Cover, black
• Mesh Filter (behind filter cap)
• Feet

Other parts (cosmetic as well as internal parts) can be replaced as part of a repair.  These parts are not customer installable.

Replacement Shipping Box

A replacement Shipping Box can be ordered with Classé. The box is made out of Coroplast®, which is a strong and waterproof material.  Semi-rigid foam inserts ensure the best possible protection during storage and transport. Please inquire with your local Classé Dealer or contact Classé directly.

*) For shipping Legacy units (made before Delta I series) we recommend using the original box if still intact, and to put this box with at least 2 inches of semi-rigid foam into a new corrugated box.